ELECTRIC SHOWER 8.5KW ZEST 2.1539.201 MIRA

Product Code: 27703

Mira Zest Electric Shower 8.5kw
The showers have separate controls for power selection and for temperature/flow adjustment. A unique flow regulator stabilises any temperature changes caused by water pressure fluctuations, which can result from taps being turned on or off or toilets being flushed. The appliance is normally connected to the cold water mains-fed supply.

• Used with Cold Mains Supply
• 2 year manufacturer's warranty (with proof of purchase)
• Left hand water and electrical inlet supplies
• Low, medium and high power selection
• Gradual, delayed turn off - safer showering for next user and low lime scale build up
• Surface mounted unit
• Adjustable spray handset featuring three exciting spray patterns. Hose, clamp bracket, soap dish, slide bar and hose retaining ring/gel hook
• Specification:
• Separate power and flow/temperature controls for ease of use
• Shower will cut out if temperature becomes too hot
• Maximum ambient temperature for the appliance whilst in use is 30ºC
• Inlet connection: 15mm plastic swivel stub for use with a compression fitting (not supplied), from the top, bottom or back
• Outlet connection: 1/2" BSP male
• The appliance requires a 40 Amp supply fuse
• The terminal block will not accept cable larger than 10mm2
• A separate permanently connected supply must be taken from the consumer unit to the appliance, via a double-pole switch, with at least a 3mm contact separation
• The switch can be a ceiling mounted pull-cord switch within the bathroom, or a wall mounted switch in an adjacent room
• Smooth and accurate temperature adjustment